Sanyo CE42LM5WP, Instruction Manual

Page: 6 / 68

6
TV/AV button
To switch from AV1, RGB, AV2, AV3, DVI or PC mode
press repeatedly or
Press and hold in a few seconds, an AV selection
menu appears. Select the mode you require using the
MENU
To enter and exit the main menu, and sub menus.
Picture mode selection
Press the button repeatedly to select the following
picture modes.
Personal - Personal preference mode.
Dynamic - Suitable for brightly lit rooms.
Standard - Normal viewing mode.
Eco - Suitable for dimly lit rooms and gives a
cinema - like effect.
Up and down
To select the next item
Standby
To switch the monitor on and off. Also see page 7
Recall
To display Input selection information and the
OFF Timer if set.
You can also select colour systems in AV mode as follows
AUTO -> PAL -> SECAM -> NTSC3.58
JXPLA
buttons
Level up/down
To adjust the sound volume level, or
enter sub menus
Sound mute
To mute the sound from the speakers.
The sound changes as follows;
Normal volume -> Mute
Bass expander
To get an emphasised bass sound ON or OFF.
Surround mode selector
To select the surround mode, OFF, MID, MAX
Screen mode selector
To select the screen mode, Natural, Full,
Zoom, Title-in or Normal.
Refer to page 10
56
REMOTE CONTROL
REMOTE CONTROL
GB
GB
Remote control battery installation
Install two "AA" 1.5 volt batteries so that the "+" and "-" marks on the
batteries match the "+" and "-" marks inside the unit into the remote
control handset.