Sanyo CE42LM4WPN-NA - CE - 42" LCD Flat Panel Display Instruction Manual Download Page 7

Page: 7 / 36

■

Child lock

You can prevent unwanted operation on the LCD monitor via the
buttons on the bottom edge of the monitor.

Press the

MENU button.

Select

Setting

using the

button.

Press the

button

to enter.

Select

Child lock

using the

button

Set the Child lock to

Off

by pressing the

button

Press the

MENU button

to exit.

■

AV2 setting

In setting menu, to select AV2 press the

button

and set to Y,Pb,Pr

or RGB, H/V depending on your external equipment.

Press the

MENU button.

Select

Setting

using the

button

press the

button

to enter.

Select

AV2 setting

using the

button

Press the

button

to select which Y,Pb,Pr or RGB, H/V.

Press the

MENU button

to exit, this automatically stores your

changes.

Press the

MENU button

to exit.

■

Off-timer setting

The Off timer will switch the monitor into the standby mode when the
selected time has elapsed.

Press the

MENU button.

Select

Setting

using the

button

press the

button

to enter.

Select

OFF Timer

using the

button

Press the

button

to change time.

The time changes in 5 minute steps.The maximum time is 120 min-
utes.

If you have set the off timer, a display appears in the corner of the
screen.

✐

If the TV set is switched off by the

standby button

on the

remote control or by the standby switch

on the top of the mon-

itor ,the timer settings will be cancelled.

Connect your PC to the connector on the left side terminal of the
set. Once connected, select PC mode via the

button on your

remote control. The set will become a monitor for the PC.

By pressing the

MENU

button on the remote control, a menu window

will appear on screen, this allows the settings to be adjusted.

To adjust the Picture settings select picture using the

buttons

on the remote, then the

button to enter the following picture

settings menu.
Press the

buttons

to adjust the Picture brightness and the

same to adjust the contrast of the picture.

Picture position

changes the picture horizontally or vertically, this is

done by using the

buttons

on the remote control.

Video adjust

changes the Phase and the clock of the screen. If the

picture is blurred or grainy, this function will adjust it to a clearer
picture.

Auto Adjust

will automatically adjust the picture by using the

button. This will change all the above settings automatically. Auto
adjust can also be achieved by pressing the
button on the remote control

Resolution

displays the current resolution of the picture. This is just

for information and cannot be adjusted.

Using the

buttons

it is possible to adjust the tone of the

screen using the White tone

Red (R) / Green (G)/ Blue (B

). This will

adjust the picture to show more of the chosen color. For example if
red is selected you can adjust the red in the picture to increase or
decrease using the

buttons

Native Resolution

is used when the PC can output WXGA

1366 x 768. The setting on your Monitor set can be changed
to receive XGA/WXGA signal using the

buttons . Once the

signal has been selected, save the settings by switching the monitor
off then on.

To select the Settings menu press the menu button on your remote
and using the

buttons to select Settings. The

button will

enter the settings menu.

Child lock/ Timer and AV2 settings are described under the Settings
menu (pg 7)
Power save, if turned ON, will turn the LCD monitor into Powersave
mode after 1 minute if no signal is detected, the LED light will turn
blue to indicate stand by. TheLCD monitor will automatically turn on
when a signal has been detected. Use

buttons

to select ON

or OFF.

MENU OPERA

TION/ PC OPERA

TION

: S

elect

: Adjust

: Exit

Setting

Child lock OFF / ON