Sanyo CE28WN5-B, Instruction Manual

Page: 7 / 24

7
GENERAL OPERA
GENERAL OPERA
TION
TION
■
To turn the TV set ON, press the Mains ON/OFF switch. The
power indicator illuminates to show the power is on.
■
To turn the TV set OFF, press it again.
■
To turn the TV set into standby mode, press the button.
The power indicator illuminates more brightly.
■
To turn the TV set ON from standby mode, press any of the
following buttons: , P
▲
, P
▲
or 0-9 buttons.
In the Standby mode the TV set is still partially powered, this is
denoted by the red Standby/Power indicator illuminating more
brightly than in Power mode.
This TV set will automatically switch into the standby mode, 10
minutes after a signal is no longer received. The time until the
set will switch off is displayed on the screen.
■ Direct Programme Selection
For selection of programme position 0 to 9, press the corresponding
numeric button. If the required programme is equal or more than
10, for example 23, first press the -/- - button and enter 2 then 3.
■
Up/Down Programme Selection
Press the P
▲
button to increase the programme position.
Press the P
▼
button to decrease the programme position.
■
If the aerial is removed the TV set will automatically switch into
the standby mode after 10 minutes.
■
When the TV set is switched on by using the On-timer function
with no signal being received, the auto-shut off function will be
ignored.
If you find the power indicator flashing, please turn the
TV set off completely with the Mains ON/OFF switch
and contact our Service desk. This warning is a sign to
let you know that the power protection function of this TV
set is now operating.
Be sure to set the Mains ON/OFF switch to the off
position, if a power failure occurs while viewing.
NOTE: It is not possible to turn on with the Mains ON/OFF
switch from the standby mode.
The Mains ON/OFF switch must be in the ON position before the
using remote control transmitter.
Mains ON/OFF
Standby
Auto Shut Off
!
!
If no picture appears but the power indicator is on, press the
button, P
▲
, P
▼
or 0-9 button as the TV set is in the Standby
mode.
Programme Selection
OFF 0:10
99
0
1
2
3