Sanyo CE28WN5-B, Instruction Manual

Page: 20 / 24

20
SPECIFICA
SPECIFICA
TIONS / SPECIAL FUNCTIONS
TIONS / SPECIAL FUNCTIONS
Common specification
Power source
AC 220~240V 50Hz
Television system System I
Colour system PAL/NTSC4.43
(PAL/NTSC4.43/NTSC3.58 in
AV mode)
Channel coverage UHF: 21-69
Aerial input impedance 75 ohm
AV terminal
21-pin terminals AV1: CENELEC Standard with RGB
AV2: CENELEC Standard with S-inputs
Front AV terminals AV3: RCA Terminal, Video and
Audio(L/R) Input
Sound output Main L/R 10 x 2 (28” and 32” models)
(Continuous) (watts)
CE28WN5-B CE32WN5-B
Picture tubes 28 32
(inches)
Dimensions 779 x 524 x 511.5 880 x 577.5 x 567
(W x H x D mm)
Weight (kg) 32.5 46.3
Specifications subject to change without notice.
This TV set allows you to set up the following special functions.
■
Prohibition of presetting, CS key entry
ITEM-1 SET
➞
0 NO
SET
➞
1 YES Sets prohibition of presetting and
CS key entry.
■
Start up programme position
ITEM-2
Presets the programme position when the set is switched on.
SET -> 0 Last programme position start
SET -> 1 Programme position "1" start
SET -> 2 Programme position "2" start
SET -> 3 Programme position "3" start
SET -> 4 Programme position "4" start
SET -> 5 Programme position "5" start
SET -> 6 Programme position "6" start
SET -> 7 Programme position "7" start
SET -> 8 Programme position "8" start
SET -> 9 "AV1" start
SETTING PROCEDURE
1 . To enter the special function mode,
press and hold the button on
the Remote control handset and then
press the P
▲
button on the TV set.
2 . To select the "Item" number, press the
F/OK
button on the remote control handset.
3 . To select the "Set" number, press the
§
or
©
button repeatedly.
4 . To return to the normal TV mode, press the button.
The setting conditions of all items can be confirmed.
Special functions are not cancelled if the TV set is switched off
or the mains disconnected.
?
?
TV Specifications
Special Functions
Scart Specifications
ITEM-1 SET -> 0
Pin Signal function Level AV1 AV2
Pin 1 Audio output (right channel) 0.5V/ 1 K ohm
✔ ✔
*
monitor out
Pin 2 Audio Input (right channel) 0.5V/10 K ohm
✔ ✔
Pin 3 Audio output (left channel) 0.5V/ 1 K ohm
✔ ✔
*
monitor out
Pin 4 Audio earth
Pin 5 Earth (blue)
Pin 6 Audio Input (left channel) 0.5V/10 K ohm
✔ ✔
Pin 7 Blue (B) input 0.7Vpp/75 ohm
✔
Pin 8 Remote switch input L:0-2V H:10-12V
✔ ✔
M: 4.5-9.5V -> 16:9 mode
Pin 9 Earth (green)
Pin 10
Pin 11 Green (G) input 0.7Vpp/75 ohm
✔
Pin 12
Pin 13 Earth (red)
Pin 14 Earth
Pin 15 Red (R) or C(chrominance) input 0.7Vpp/75 ohm
✔
*
Red input
✔
*
C-input
Pin 16 Fast blanking L:0-0.4V H:1-3V
✔
Pin 17 Earth(video)
Pin 18 Earth
Pin 19 Video output 1 Vpp/75 ohm
✔
*TV output
✔
*
monitor output
Pin 20 Video/sync *1 or Y (luminance) input 1 Vpp/75 ohm
✔
*
Video/sync-input
✔
*
Video/Y-input
Pin 21 Connector shield