INSTALLATION
ERROR DISPLAYS
Procedure To Mount The CD Changer Commander unit
1. Determine where the commander unit will be located.
2. Be sure that the mounting surface where the commander unit will be located, is
clean and dry.
3. Remove the protective paper from the back of the two sided tape.
4. Apply the commander unit to the desired location.
Installation of the FM Modulator/Ground Isolator:
Install the FM Modulator/Ground Isolator to
the floor or other surface with the included
tapping screws (M3 x 12).
n
Error Displays
If the event of a CD changer malfunction, one of the errors described below will be
displayed.
Error display
: :
I....
. . . . .
. . .
:
.
Disc change malfunction.
Disc loaded upside down.
disc.
. . . .
. .
Too high temperature to play.
Magazine has not been installed.
i...:
.
. . .
. . .
No discs loaded inside magazine.
No discs loaded into magazine
When using FXD-C200, “E-07” is not displayed.
