−
11
−
Determination of Camera Installation Position (example)
•
Temporarily adhering the camera with the tape, locate a suitable installation position by adjusting
the camera angle so that the rear of the vehicle (bumper and other areas) is visible in the monitor.
•
Install the camera in a position that does not allow the illumination of a high-mount brake light to
reflect into the camera lens.
•
Make sure the camera does not contact or rub against the vehicle body when the rear door opens
or closes.
•
Removing and re-adhering the bracket will weaken the adhesion strength.
•
Position the camera so that it is not aimed directly at the headlights of rear-oncoming vehicles.
The recommended installation area is shown below:
Installing the camera outside of this area could result in reduced camera functionality and reduced
rear-view visibility.
•
Installing the camera on the rear spoiler or liftgate. (example)
•
The camera can also be installed in the taillight/license plate area or on the rear window.
Note
Recommended
camera installation area
Center of vehicle
15.7
in
15.7
in
70.9
in
29.5
in
9.8
in
9.8
in
Camera
<Rear spoiler>
<Liftgate>
Camera
Camera
Camera
< Taillight/license plate area >
< Rear window >
Need help? Call
1-800-421-5013
Summary of Contents for CCA-BC200
Page 2: ... 1 ...
