Sanyo Carrier 16LJ Series, Installation Instructions Manual

Page: 27 / 52

2
NOTES
1. The machine base has a ø50-mm hole for the anchor bolt.
2. The anchor bolt should be fixed as shown in the detail
drawing. The washer should be welded to the base (see
Fig. 16).
3. There should be a drain channel around the foundation.
16LJ Weight, kg Dimensions, mm
AA + BB AA BB A B C D e F G J K
11 4000 2000 2000 1896 -- 185 360 800 150 1100 160 900
12 4200 2100 2100 1896 -- 185 360 800 150 1100 160 900
13 5200 2600 2600 2916 -- 185 360 800 150 1100 160 900
14 5500 2750 2750 2916 -- 185 360 800 150 1100 160 900
21 6700 3350 3350 2866 -- 200 400 1000 150 1300 200 1100
22 7100 3550 3550 2866 -- 200 400 1000 150 1300 200 1100
23 8200 4100 4100 3886 -- 200 400 1000 150 1300 200 1100
24 8700 4350 4350 3886 -- 200 400 1000 150 1300 200 1100
31 10600 5300 5300 3836 -- 225 450 1100 150 1400 250 1200
32 11100 5550 5550 3836 -- 225 450 1100 150 1400 250 1200
41 12900 6450 6450 3836 -- 225 450 1150 150 1450 250 1250
42 13400 6700 6700 3836 -- 225 450 1150 150 1450 250 1250
51 18200 9100 9100 3706 130 190 510 1600 180 1960 250 1700
52 19700 9850 9850 4248 130 190 510 1600 180 1960 250 1700
53 21100 10550 10550 4746 130 190 510 1600 180 1960 250 1700
table 2 - Dimensional data
Fig. 15 - 16LJ-11 to 16LJ-42
Fig. 17 - 16LJ-51 to 16LJ-53
4. The floor surface should be made waterproof to facilitate
maintenance work.
5. The surface of the foundation should be made flat
(levelling tolerance is 1 mm for 1000 mm).
6. Anchor bolts and nuts are to be supplied by the customer.
Fig. 16 - Details of weld
4.3 - exhibit LC
4.3.1 - Foundation dimensions, mm
150
A
B B
D
C
E
F
G
J
K
AA
BB
150
A
G
E
F
C
AA
BB
K
D
J
Nut
Weld
Washer
base
80
150 mm min.