Adjusting Image in D-Sub (computer) mode
Press
MENU
to display the menu main page.
1
Press
CH+
repeatedly to select
Image
page.
/-
2
Press
ENTER
or
VOL+/-
to access the
Image
page.
3
The
Auto Adjustment
.
item will be highlighted automatically
5
Image Position
Image
Auto Adjustment
Move
Move
Move
Select
Select
Select
Menu to exit
Menu to exit
Menu to exit
0
0
Auto Adjustment
Image Position
Phase
Clock
Auto Adjustment: Yes
30
1328
With working in D-Sub mode, this unit allows you to perform several adjustments for image
Adjusting the Image Position
The unit allows you to adjust the image position of the screen if it is not well-aligned.
Adjusting Clock and Phase
Repeat steps 1~3 in
[
]
to access
Image
page.
Adjusting the Picture Automatically
1
Press
VOL+/-
to adjust the value of the item until the screen is well-aligned.
Press
CH+
repeatedly to select
/-
Clock
or
Phase
item.
2
3
Adjust the clock frequency of the set's internal clock signal. If shimmering or rainbow-like noise is
apparent in the image, try adjusting the clock frequency setting.
You may find that images blur, depending on the clock phase of your PC's Processor. If you experience
blurring , you can obtain a clearer image by adjusting the phase setting.
Note:
Your computer settings should be 1280 x 768 resolution with 60Hz refresh rate.
The unit automatically adjusts phase, clock or position, etc.
Adjusting the Picture Automatically
Press
ENTER
or
VOL+/-
again to start
Auto Adjustment
.
Image
Move
Select
Menu to exit
Auto Adjustment
Image Position
Phase
Clock
30
1328
Press
ENTER
or
VOL+/-
again to access the
Auto Adjustment
page.
4
The
Auto Adjustment / Yes
.
item will be highlighted automatically
Repeat steps 1~3 in
[
]
to access
Image
page.
Adjusting the Picture Automatically
1
Press
CH+/-
or
VOL+/-
to adjust the image position until the screen is well-
aligned.
Press
CH
to select
+/- Image
Position
item.
2
3
Press
ENTER
or
VOL+/-
to access the
Image Position
page.
4
19
