background image

 

sent to main chip 

MSD309PX 

to be processed by acoustic effect processor and volume controller to get 

two parts of signals: the analog part of signal is sent to earphone power amplifier 

MAX9820 

to be 

amplified and then outputted to earphone jack; the digital part of signal I2S is sent to digital audio power 
amplifier 

TAS5711 

to be processed by D/A convertor and power amplifier, then outputted to drive 

speakers. 

 

5

  HDMI input signal flow 

HDMI video signal is inputted to main chip 

MSD309PX 

to be processed by video decoder, video 

processor and zoom controller, then LVDS signal is outputted to drive display panel; 

HDMI audio signal is sent to main chip 

MSD309PX 

to be processed by audio decoder, pre-amplifier, 

acoustic effect processor and volume controller to get two parts of signals: the analog part of signal is sent 
to earphone power amplifier 

MAX9820 

to be amplified and then outputted to earphone jack; the digital 

part of signal I2S is sent to digital audio power amplifier 

TAS5711 

to be processed by D/A convertor and 

power amplifier, then outputted to drive speakers. 

Summary of Contents for 1 682 350 96





































Reviews: