SANYANG INDUSTRY CO. SYM, Service Manual, Page: 10 / 176

SYM
1. GENERAL INFORMATION/TROUBLE DIAGNOSIS
1-5
y
Lubricate the rotation face with specified
lubricant on the lubrication points before
assembling.
y
Check if positions and operation for installed
parts is in correct and properly.
y
Make sure service safety .
y
Note that do not let parts fall down
y
Before battery removal operation, it has to
remove the battery negative (-) cable firstly.
Notre tools like open-end wrench do not
contact with body to prevent from circuit short
and create spark.
y
After service completed, make sure all
connection points is secured. Battery
positive (+) cable should be connected firstly.
And the two posts of battery have to be
greased after connected the cables.
y
Make sure that the battery post caps are
located in properly after the battery posts had
been serviced.
y
If fuse burned, it has to find out the cause
and solved it. And then replace with
specified capacity fuse.
capacity
verification