Machine Operation
SY26U Excavator OMM
4-16
Operation and Maintenance Manual — 1119
SANY
6. Push the throttle control lever (2) to the forward
(low idle) position.
7. Turn the key switch (3) to ON (do not start the engine)
and check the following items on the monitor display:
•
Engine coolant temperature
•
Fuel level
•
Fault codes
NOTE:
If all gauge readings are normal and no fault
codes are present, the display will return to
the home screen within 2 seconds after the
key switch is turned to ON.
NOTE:
Sound the horn to warn personnel that the machine is being started. See “Horn Function Check” on
8. To start the engine, turn the key switch to START. When the engine starts, release the key; it will return to ON.
Idling the Engine
Idling the engine for long periods wastes fuel and causes carbon formation, oil dilution, formation of lacquer or
gummy deposits on the valves, pistons, and rings, and rapid accumulation of sludge in the engine.
Allow the engine to idle until the engine coolant temperature reaches 140°F (60°C) before beginning operations.
NOTICE!
Never crank the engine for more than 15 seconds, as it could damage the machine or cause
the machine to operate improperly. If the engine fails to start after 15 seconds, stop and allow
the starter motor to cool for at least 2 minutes before attempting another start.
Fig. 4-16
0003147
2
3
