Machine Controls
SY26U Excavator OMM
3-16
Operation and Maintenance Manual — 1119
SANY
Flow Rate Setting Screen
The Flow Rate Setting screen displays the flow rate
information of the operating mode of the hydraulic work
tool selected in the Flow Rate Information screen.
NOTE:
•
Check the work tool operator manual for hydraulic
flow rate information.
•
When the bar graph (1) has been set to the highest
level, the flow rate is at its maximum (100).
•
When the bar graph has been set to its lowest level
(no bar is visible), the flow is blocked and no
hydraulic oil will flow.
Flow rate of the selected function in the Flow Rate
Information screen can be adjusted in the bar graphic in the
Flow Rate Setting screen:
•
Press the button below the plus icon (2) to increase
the length of the bar graph, which will increase the
flow rate.
•
Press the button below the minus icon (3) to decrease the length of the bar graph, which will lower the flow
rate.
•
Press the button below the check mark icon (4) to confirm the flow rate adjustment.
•
Press the button below the return icon (5) to return to the previous screen.
System Unlocked Screen
Factory and service only.
Reserved Function
Not used at this time; reserved for future function.
Fig. 3-18
0003817
5
4
2
3
1
