SY135C Excavator
Machine Operation
SANY
Operation and Maintenance Manual — 0120
4-5
TABL
E OF
CONT
E
N
TS
INTRODUCTION
SAFE
T
Y
MACHIN
E
CONTROLS
MACHINE
OP
ERA
T
IO
N
MA
INTENANCE
S
P
E
CI
F
ICA
T
ION
S
OP
T
IO
N
A
L
EQUI
PMENT
PRESTART CHECKS AND ADJUSTMENTS
Daily Maintenance Record
NOTE:
•
See “Maintenance Log” on page 1-3 for additional information.
•
See “Other Approved Lubricants” on page 5-14 for additional information.
Check the maintenance log to verify that all required maintenance checks have been performed before operating
the machine.
Complete the following checks and adjustments before starting the engine each day:
•
Check the maintenance log to verify that all required maintenance checks have been performed before
operating the engine.
•
Check the machine for loose hardware, fluid leaks, or any other signs of damage. Make repairs as
necessary.
•
Make sure that all fluids are at operational levels.
•
Inspect the engine compartment for combustible debris that may come in contact with hot engine
components. Clear all debris from the engine and the engine compartment.
•
Check the undercarriage (tracks, sprockets, carrier rollers, and guards) for damage, wear, loose fasteners,
or roller oil leaks. Make repairs as necessary.
•
Check the bucket or optional equipment for damage.
•
Clean and check the mirrors for damage. Repair as necessary. Adjust the mirrors so the area behind the
machine is visible from the operator seat.
•
Check the seat belt and buckle for damage or wear. Replace if necessary.
•
Check the gauges and the monitor in the cab. Replace or repair any malfunctioning parts or components.
