Sanwa YX-361TR, Instruction Manual

Page: 49 / 56

— 22 —
DRAWING No.YX361TR 15-1012 2040 2040
2.
3.
4.
Then depending on the polarity of the transistor to be tested, insert
the probe jack into the black lead if it is NPN transistor and into the
red lead if it is PNP transistor.
There are two lead lines each with an alligator clip at the end.
Connect the black clip to the base terminal of the transistor and the
red clip to the collector terminal.
Then connect the test lead (the red lead if the transistor is NPN and
the black lead if PNP) to the emitter terminal of the transistor to be
tested.
With this connection, the tester needle responds, indicating the
IC/IB (hFE) value on the blue hFE scale
6
.