Table tap
Plug
④
Replace the red and black test pins, make sure that the
displays the same as that when the test leads are released.
⑤
After measurement, release the red and black test pins from
the object measured.
Judgment:
When the items
③
and
④
are normal, the diode is good.
●
The input terminals release voltage is about 1.5V.
5-5 Checking Continuity (
)
WARNING
Never apply voltage to the input terminal.
1) Application: Checking the continuity of wiring and selecting wires.
2) Measurement procedure
①
Set the function switch
at
Ω
/
/
/
function
and select the function
by SELECT switch.
②
Apply the red and black
test pins to a circuit or
conductor to measure.
③
The continuity can be
judged by whether the
buzzer sounds or not.
④
After measurement, release the red and black test pins from
the object measured.
●
The buzzer sounds when the resistance in a circuit to measure
is less than about 10
Ω〜
100
Ω
.
●
The input terminals release voltage is about 0.4V.
5-6 Capacity Measurement (
)
WARNING
1. Never apply voltage to the input terminal.
2. This is not suitable for measurement of electrolytic condenser
such as a large leakage condenser.
1) Application: Measures capacitance of capacity.
ー 9 ー