－ 22 －
－ 21 －
1. The body is not resistant to volatile solvents. Do not
wipe out with solvents or isopropyl alcohol. Clean the
instrument up with a dry soft cloth.
2. The body is not resistant to heat. Keep it away from
heat-generating devices such as solder irons.
3. Do not save the instrument into vibratory places or
where the instrument may fall off.
4. Do not expose the instrument to direct sunlight
and do not save it into any places with extreme
temperature, humid, or condensation.
5. Remove the battery for saving the instrument over a
long period of time.
Replacement procedure
①
Remove the screw fixing the battery door using a slotted
screwdriver.
②
Remove the battery door and replace all the 4 batteries
with new ones according to the battery mark inside the
battery holder.
③
Re-fasten the battery door screw. That is all.
6-4 Storage
CAUTION
Save the instrument into an appropriate place, according to
the precautions above. (Refer to the section 8-1.)
[7] AFTER-SALE SERVICE
7-1 Warranty and Provision
Sanwa offers comprehensive warranty services to its end-
users and to its product resellers. Under Sanwa's general
warranty policy, each instrument is warranted to be free
from defects in workmanship or material under normal
use for the period of one
(1) year from the date of purchase.
This warranty policy is valid within the country of purchase
only, and applied only to the product purchased from
Sanwa authorized agent or distributor.
Sanwa reserves the right to inspect all warranty claims
to determine the extent to which the warranty policy
shall apply. This warranty shall not apply to disposables
batteries, or any product or parts, which have been
subject to one of the following causes:
1. A failure due to improper handling or use that deviates
from the instruction manual.
2. A failure due to inadequate repair or modification by
people other than Sanwa service personnel.
3. A failure due to causes not attributable to this product
such as fire, flood and other natural disaster.
4. Non-operation due to a discharged battery.
5. A failure or damage due to transportation, relocation or
dropping after the purchase.
7-2 Repair
Customers are asked to provide the following information
when
requesting services:
1. Customer name, address, and contact information
2. Description of problem
3. Description of product configuration
4. Model Number
5. Product Serial Number
6. Proof of Date-of-Purchase
7. Where you purchased the product
Please contact Sanwa authorized agent / distributor /
service provider, listed in our website, in your country with
above information. An instrument sent to Sanwa / agent