Sanwa CD772, Instruction Manual, Page: 51 / 56

— 21 —
[8] SPECIFICATIONS
8-1 General Specifications
∆
-
∑
method
True RMS value method
4000 counts
Approx. 3 times/sec.
Auto and Manual (Some with Manual only or Auto only)
“OL” shown in numerical part. (1000V DC/AC, 10A excluded.)
“–” indicated only when negative input.
Battery ( 0000 ) mark lights or flickers at approx.
2.4 V or below.
Altitude 2000 m or below, pollution degree II.
5
°
C to 40
°
C and humidity range as follows. No condensation allowed.
At 5
°
C to 31
°
C, 80% RH (max). At 31
°
C to 40
°
C, linear drop from
80% RH to 50% RH.
–10
°
C 40
°
C, 80%RH max., no condensation
40
°
C 50
°
C, 70%RH max., no condensation
(When the meter will not be used for a long time, remove the batteries before storage.)
SUM–3 (R6), 2 pieces
About 150 hours continuously at DCV. (Auto power save canceled)
Power save about 30 minutes after no operation.
0.5A/1000V, Breaking capacity 30kA
16A/1000V, Breaking capacity 30kA
IEC61010-1 CAT.III 600V CAT.II 1000V
IEC61010-031: 2008
IEC61326
166(L) X 82(W) X 44(D) mm (Projections not included)
Approx. 360 g (batteries included)
Typical 15mW (at DCV)
Test lead (TL-25a), K type thermocouple temperature
sensor (K-250CD), Instruction manual
Alligator clip: CL-11, CL-15, TL-8IC
Clamp probe: CL-22AD, CL-33DC, CL-20D
Temperature probe: K-8-800, K-8-650, K-8-300,
K-8-500, K-8-250
K-type adapter: K-AD
High voltage probe: HV-60
Carrying case: C-77, C77H
Operation method
AC measuring method
LCD
Sampling rate
Range selection
Over-range indication
Polarity indication automatic
selection
Battery low warning
Environmental condition
Operating temperature /
humidity
Storage temperature /
humidity
Power supply
Battery life
Auto power save
Fuse
Safety standards
EMC Directive
Dimensions
Weight
Power consumption
Standard
accessaries included
Optional accessaries
7 DRAWING No. CD772 03-1101 2040 6017
CD772̲E 11.1.17 12:23 ページ21