Sanwa CD731A, Instruction Manual

Page: 36 / 56

− 32 −
4-2 How to Use the Stand
Please use the stand that there is on the side of rear case like a
figure.
○
Auto power off, Auto powersave
This device incorporates auto-power-off function that turns off
the display in about 30 minutes to save battery draining. There is
a little battery draining even if the auto power save function is
activated, therefore be sure to return the Power/Function knob to
OFF after measurement. Press the data hold switch before the
auto-power-save function is activated to use the devise
continuously. To deactivate the auto-power-save function, turn
the meter ON while pressing the SELECT button.
○
Over Limit (O.L) indication
In case of excess input to this device, the indicator displays O.L.
If O.L is displayed during the voltage function, stop the input
immediately.
〔
Fig 3
〕