6-5-2
Measuring ACV
〜
(max. AC 600V)
1) Application
Measures sine-wave a.c. voltages such as commercial power line.
2) Measurement Procedure
①
Set the range select knob to the proper ACV range according
to the magnitude of the voltage to be measured.
②
Put in the black pin plug to the "COM" terminal and red pin plug
to the "V" terminal.
③
Apply the red and black test pins to the circuit to measure.
④
Read the indication on the scale ("V" scale)
150V range
―
scale 0
〜
150
300V range
―
scale 0
〜
300
600V range
―
scale 0
〜
600
⑤
After measurement, remove the red and black test pins from
the circuit measured.
・
If a voltage to measure can not be estimated, first measure it
with the meter in the 600V range, then change it to a suitable
range.
・
This instrument employs the average measurement system and
some error is made to the indication of waveforms other than
sine waves.
・
The accuracy guaranteed frequency range is 50
〜
60Hz.
・
When measuring a voltage, be sure to connect the test leads
in parallel to a load.
CAUTION
