1. If the rear case or the battery lid is removed with input applied
to the input terminals, you may get electrical shock. Before
starting the work, always make sure that no input is applied.
2. Before starting the work, be sure to release the test leads from
the circuit.
4-3
Battery and Fuse Replacement
〈
How to Replace
〉
①
Remove the battery lid screw with a screwdriver.
②
Remove the battery lid.
③
Take out the battery or fuse and replace it with a new one.
④
Attach the battery lid and fix it with the screw.
Note
・
Fuse replacement
Pry up the metal part of the fuse using the pin of a test lead or
other tool to remove the fuse.
・
A spare fuse is attached to the inside of the battery lid.
remove
the screw
remove the
battery lid
Fuse
0.5A/250V (6.3
×
30mm)
Battery (R03)
WARNING
