background image

8

Instruction Manual for QUATTRO

1-888-726-8869

www.sanuvox.com

ULTRAVIOLETS: UVC

The UVC (254 nm) wavelengths produced by Sanuvox UV units and systems are the same as the ultraviolets produced by the 

Sun. The UVC attacks the micro-organisms on a molecular level deactivating the contaminants. Unlike conventional UV lamps 

on the market, Sanuvox UV units and systems use a patented process designed to deliver the maximum UV dosage to the 

moving airstream or surface.

 CAUTION: Never expose eyes or skin to an operating UV lamp.

STORAGE

The QUATTRO does not require specific storage. It is a portable unit that works continuously when ON, or automatically when 

selecting proper settings (fan speed and timer).

 CAUTION: Keep away from unsupervised children. This unit is not a toy.

7.  Plug the power cord into the wall outlet.

8.  Turn on.

6.  Replace the QUATTRO in the duct opening in the correct position 

and screw it back.

STEP 7

STEP 8

STEP 6

How to Clean your Product

For optimal performance, the lamp(s) and filter(s) should be kept free of dust and residue deposit. Clean when necessary with 

mild soap or alcohol. To clean the unit exterior, use a damp cloth with general purpose detergent. Always spot test the cleaner 

to make sure it does not damage the surface.

 CAUTION: Under no circumstance should water be sprayed or splashed onto the product.

Summary of Contents for Quattro











Reviews: