background image

B

B

C

C

D

A

3

Instruction Manual for QUATTRO

1-888-726-8869

www.sanuvox.com

ABOUT THE PRODUCT

Congratulations on the purchase and installation of your new Sanuvox ultraviolet air purifier. Sanuvox UV air purifiers are the 

most advanced  air purification systems available having been proven to help reduce up to 99.99% of biological and chemical 

contaminants that circulate throughout your home or facility. Sanuvox systems have been tested by medical universities and 

lndependent 3rd party laboratories. 

The Sanuvox Quattro system is designed for the disinfection of airborne mold, virus, bacteria and common odors up to a 5-ton 

HVAC system.

The Sanuvox QUATTRO is installed in the RETURN (preferred) or SUPPLY plenum of the HVAC equipment treating 100% of the 

the air-stream. The actual percentage is based on the duct size, percentage of fresh air, velocity and the specific contaminants 

to be treated. Depending on the variables above, more than one QUATTRO may be required  for commercial applications. 

For information or recommendations on how to size your specific application, please call SANUVOX at 1-888-726-8869.

COMPONENTS

How it Works

The Quattro is installed in a return or supply duct parallel to airflow for maximum exposure time and consists of four 18" lamps, 

each with their own parabolic aluminum reflector.

A.  UV Lamp Assembly

B.  Arm’s Ajustable Clutches

C.  Black Front Plate

D.  LED Signals

Summary of Contents for Quattro











Reviews: