9
Instruction Manual for Biopür
1-888-726-8869
www.sanuvox.com
How to Clean your Product
For optimal performance, the lamp(s) should be kept free of dust and residue deposit. Clean when necessary with mild soap or alcohol.
Always spot test the cleaner to make sure it does not damage the surface.
The filters can be cleaned with a vaccum cleaner when so desired / when the HEPA indicator is ‘ON’ to maintain system performance
(approximatively once a month).
CAUTION: Under no circumstances should water be sprayed or splashed onto the product.
ULTRAVIOLETS: UVV & UVC
The UVC (254 nm) and UVV (185 nm) light produced by Sanuvox UV units and systems are the same two UV wavelengths produced
by the Sun. The UVC wavelength attacks the micro-organisms on a molecular level deactivating and destroying the contaminants,
while the UVV wavelength degrades the chemicals and odors. Unlike conventional UV lamps on the market, Sanuvox UV units and
systems use a patented process designed to deliver the maximum UV dosage to the moving air-stream or surface.
CAUTION: Never expose eyes or skin to ultraviolet light from any source.
STORAGE
The Biopür does not require specific storage. It is a portable unit that works continuously when ON, or automatically when selecting
proper settings (fan speed and timer).
CAUTION:
Keep away from unsupervised children. This unit is not a toy.
ELECTRICAL RATINGS, POWER CONSUMPTION & AVAILABLE VOLTAGE
The product is rated at AC120V/60Hz.
See product label to confirm power consumption of your specific unit or system.
NOTE: IF YOU EXPERIENCE A PROBLEM, PLEASE CONTACT CUSTOMER SERVICE FIRST OR SEE YOUR WARRANTY.
DO NOT RETURN THE PRODUCT TO THE ORIGINAL PLACE OF PURCHASE. DO NOT ATTEMPT TO OPEN THE PRODUCT
OR TAMPER WITH ITS COMPONENTS WITHOUT CONTACTING CUSTOMER SERVICE FIRST. DOING SO MAY VOID YOUR
WARRANTY AND CAUSE PERSONAL INJURY OR DAMAGE TO THE PRODUCT.
Problem
Possible Cause
Solution
Unit doesn’t come ON.
- There is no power to the electrical outlet.
- Make sure the power outlet is working.
- Make sure the unit is plugged in to 120V
outlet.
- The On/Off switch is not ON.
- Push the POWER button on the display.
Unit comes ON, but
makes a dull
hissing noise.
- Fan motor needs to warm up for first time use
- This should resolve without first hour of
use or so. Note that a higher fan speed will
make more noise, which is normal.
Unit comes ON, but
makes loud noise
and/or is shaking.
- Filters inside are still wrapped in plastic bags
- Styrofoam is still inside the unit
- Immediately turn off your unit, open the
cover, make sure to unwrap filters from
plastic bags and remove and dispose of the
styrofoam.
Unit comes ON, but the blue light isn’t
visible.
- Filters inside are still wrapped in plastic bags
- Styrofoam is still inside the unit
- Immediately turn off your unit, open the
cover, make sure to unwrap filters from
plastic bags and remove and dispose of the
styrofoam.
- Lamp is defective.
- Replace lamp.
Contact Sanuvox for all your needs in terms of replacement parts: UV lamp, filter kit, etc.
TROUBLESHOOTING
If your product is not working properly, refer to the following.
