5
3
ECAIA ionizer S faucet - Display
Compare table D (p. 2).
Control cable
– transmits signal to the ECAIA ionizer S+
Quick release fastener 5/16"
– connection for alkaline water outlet
Quick release fastener 1/4"
– connection for acidic water outlet
Display
(ECAIA ionizer S faucet)
Power button
– for switching the device on and off
Button for alkaline levels (ALK)
– Selection of the ionization power of the alkaline
water; alkaline water flows out of the upper outlet (E) (1 = weak, 5 = strong).
Button for acidic levels (ACID)
– Selection of the ionization power of the acidic wa-
ter; acidic water flows out of the upper outlet (E) (1 = weak, 2 = strong).
Button of the level purify (PU)
– filtered water flows out of the upper and lower
outlets (E/F); ionization is deactivated.
Display
– indicates the selected ionization level.
•
AL1 = alkaline level 1
•
AL2 = alkaline level 2
•
AL3 = alkaline level 3
•
AL4 = alkaline level 4
•
AL5 = alkaline level 5
•
AC1 = acidic level 1
•
AC2 = acidic level 2
•
PU = PURIFY
Filter indicator
– depending on which filter (1 or 2) lights up, the flow rate (0 to 999)
is shown on the display (D5). The button PURIFY (D4), allows you to switch between
filter 1 and 2 when the device is switched off.
Upper water outlet
– Alkaline water outlet (acidic water outlet if the ACID program has
been selected)
Lower water outlet
– Acidic water outlet (alkaline water outlet if the ACID program has
been selected)
Note
: In principle, you should always consume the water that flows out of the upper wa-
ter outlet (E).
A
B
C
D
D1
D2
D3
D4
D5
D6
E
F
Summary of Contents for ECAIA S
Page 13: ...13 ...
