background image

Milestone AV Technologies and its affi

  liated corporations and subsidiaries (collectively, “Milestone”), intend to make this manual accurate and complete. However, 

Milestone makes no claim that the information contained herein covers all details, conditions, or variations. Nor does it provide for every possible contingency in 
connection with the installation or use of this product. The information contained in this document is subject to change without notice or obligation of any kind. 
Milestone makes no representation of warranty, expressed or implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, 
completeness or suffi

  ciency of the information contained in this document.

©2013 Milestone AV Technologies. All rights reserved. Sanus is a division of Milestone.
All other brand names or marks are used for identifi cation purposes and are trademarks of their respective owners.

Thank you for choosing Sanus! Please take a moment to let us know how we did: 

SANUS

 • 6436 City West Parkway • Eden Prairie, MN 55344 USA

6901-002296 00

Call us: 1-800-359-5520

UK: 0800 056 2853

Email us: [email protected]

Leave a review: sanus.com

Find us on Facebook: SANUS

Follow us on Twitter @sanussystems

Summary of Contents for VXT5

































Reviews: