25
ESPAÑOL
PASO 1 Colocar la placa de sujeción en el televisor
Piezas y elementos de sujeción para el PASO 1
NOTA:
No todos los elementos de sujeción incluidos deberán utilizarse.
ADVERTENCIA
:
Este producto contiene piezas pequeñas que, si fuesen tragadas, podrían producir asfixia.
Antes de iniciar el ensamblaje, compruebe que todas las piezas estén incluidas y en buenas condiciones. Si faltan piezas o alguna está dañada, no devuelva el
artículo al distribuidor; póngase en contacto con el Servicio de Atención al Cliente. Nunca utilice piezas deterioradas.
1-1 Seleccione el diámetro de los tornillos para el televisor
Enrosque manualmente los tornillos en los encastres roscados del dorso del televisor a fin de determinar qué diámetro de tornillos (
M6 o M8
) utilizar.
1-2 Seleccione la longitud de los tornillos para el televisor
PRECAUCIÓN
:
Verifique que el tornillo o la combinación de tornillo y separador enrosquen correctamente. Si el tornillo es demasiado corto no sostendrá el
televisor y, si es demasiado largo, dañará el televisor.
Si el dorso del televisor es plano Y usted desea que el televisor quede más cerca de la pared, utilice los tornillos cortos (a).
Utilice los separadores y los tornillos largos (b) para: televisores con dorso irregular o redondeado, televisores con orificios de montaje intercalados o en el caso
de necesitar un espacio adicional para cables.
1-3 Acople las placas de sujeción verticales del televisor
Alinee las placas de sujeción verticales del televisor
01
sobre el patrón de orificios del televisor, y fíjelas usando su selección de tornillo/arandela (a) o
espaciador/tornillo/arandela (b).
PRECAUCIÓN
:
Evite el riesgo de lesiones y daños materiales. Las pestañas de montaje deben apuntar hacia abajo tal como muestra la imagen.
Si su televisor incluía adaptadores para soporte mural o espaciadores insertables, consulte la sección Resolución de problemas en las PÁGINAS 20-21.
Ver página 3