background image

4

IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USE

No — Perfect!

Yes — This mount is NOT compatible. MountFinder.Sanus.com or call 
              1-800-359-5520 (UK: 0800-056-2853) to fi nd a compatible mount.

Please read through these instructions completely to be sure you’re comfortable with this easy install process. 
Also check your TV owner’s manual to see if there are any special requirements for mounting your TV.

If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this 
product, contact Customer Service at 1-800-359-5520 (UK: 0800-056-2853).

 

CAUTION: 

Avoid potential personal injuries and property damage! 

 

This product includes directions and hardware for use with wood stud, solid concrete and concrete block walls – 
DO NOT install into drywall alone. 

 

The wall must be capable of supporting fi ve times the weight of the TV and mount combined.

 

Do not use this product for any purpose not explicitly specifi ed by manufacturer.

 

Manufacturer is not responsible for damage or injury caused by incorrect assembly or use.

Do you have 

all the tools 

needed?

Before getting started, let’s make sure this mount is perfect for you!

1

2

3

4

What is your 

wall made of?

Drywall 

with 

wood 

studs?

Solid concrete 

or 

concrete

 

block?

Unsure?

Perfect!

Perfect!

Ready to 

begin?

Call Customer Service: 
1-800-359-5520  
(UK: 0800-056-2853)

 

CAUTION: 

DO NOT

 

install 

into 

drywall alone

?

50 lbs.

(22.7 kg)

Does your TV 

(

including accessories)

 

weigh 

more

 than 

50 lbs. (22.7 kg)?

W

ood Stud Install

Concrete Install

Pencil

Screwdriver

Tape 

Measure

7/32 in.

(5.5 mm)

Wood

Drill Bit

Electric Drill

Hammer

1/2 in. 

 (13 mm)

Socket 

Wrench

Drill Bit

3/8 in.

(10 mm)

Concrete

Para Español ver página 26

Summary of Contents for VSF409



































Reviews: