Sanus VLF311-B2, Instruction Manual

Page: 12 / 60

12
Insert lag bolt anchors [05] . Then insert lag bolts [03] through the wall plate [01] and into the anchors.
CAUTION:
Improper use could reduce the holding power of the lag bolt. To avoid potential injuries or property damage:

Be sure the anchors [05] are seated flush with the concrete surface

Tighten the lag bolts [03] only until the washers [04] are pulled firmly against the wall plate [01]

DO NOT over-tighten the lag bolts [03]
2-3 Insert anchors and lag bolts
[05]
[05]
[01]
[03]
[04]
13 mm
(1/2 in . )