7
3
4
63.5 mm
(2½ in.)
5.5 mm
(7/32 in.)
3. Drill pilot holes.
IMPORTANT:
Pilot holes must be drilled to a depth of 63.5 mm (2½ in.), using a 5.5 mm (7/32 in.) diameter drill bit.
4. Using the bit driver
03
tighten the lag bolts
02
only until they are pulled firmly against the wall plate
01
.
CAUTION:
Improper use could reduce the holding power of the lag bolts
02
. DO NOT over-tighten the lag bolts
02
.
01
03
02
STEP 1
