14
Min. 16 in. (40.6 cm)
CAUTION:
Avoid potential
personal injury or property damage!
STEP 2C
Locate the studs using a
stud finder.
Find the edges of the studs
using an awl or small drill bit.
Mark the centers of the
studs with a pencil.
1
LOCATE
2
VERIFY
3
MARK
●
Studs must be at least 2x4 / 25 ga.
●
If back side of wall is unfinished,
drywall must be installed to a minimum
of one stud left and right of the stud(s)
being used to install the mount
●
Drywall must be a minimum of
1/2 in. (13 mm) thick on each
side of the studs, and a minimum
clearance of 1 ⅞ in. (48 mm)
behind the wall is required
●
This product must be centered on
the studs
●
Stud type and structural strength
must conform to the North American
Specification for the Design of Cold-
Formed Steel Structural Members
[362 S 125 18, C-Shape, S - Stud Section]
●
Drywall must be secured to studs with
screws 12 in. (304.8 mm) on center
Steel Stud Installation Kit (NOT INCLUDED)
1/4-20 x 1.75
1/4
x4
S1
x4
S2
x4
S3
1/4-20 SNAP Toggle BB
.734 x .312 x .065 in.
*
Contact Customer Service at 1-800-359-5520 to have the
additional hardware
shipped directly to you.
*
Summary of Contents for VDLT16
Page 31: ...31 ...
