11
3. Drill pilot holes using a 7/32 in. (5.5 mm) diameter drill bit. Remove template
07
.
IMPORTANT
: Be sure to drill into the center of the stud.
IMPORTANT
: Pilot holes must be drilled to a depth of 3 in. (75 mm).
4. Install arm assembly
08
using two lag bolts
09
. Tighten the lag bolts only until they are pulled firmly against the wall plate.
CAUTION:
Improper use could reduce the holding power of the lag bolt.
DO NOT over-tighten the lag bolts
09
.
Wood Stud Installation
3 in. (75 mm)
7/32 in.
(5.5 mm)
4
3
09
09
07
08
