Sanus CFR1615, Instruction Manual

Page: 13 / 100

13
3 4
Drill pilot holes as illustrated.
CAUTION:
Improper use could reduce the
holding power of the lag bolt. To avoid potential
injuries or property damage: pilot holes
MUST
be drilled to a depth of 89 mm (3½ in.), using a
5.5 mm (7/32 in.) diameter drill bit.
89 mm
(3 ½ in.)
Start upper lag bolts [14] , hang frame assembly
on bolts [14] , then slip "U" washers [11] onto
the upper bolts [14] . Lower bolts [14] use round
washers [12] .
Tighten lag bolts [14] only until the washers [11]
and [12] are pulled fi rmly against the brace [03] .
CAUTION:
Improper use could reduce the
holding power of the lag bolt. To avoid potential
injuries or property damage
DO NOT over-
tighten the lag bolts [14] .
[14]
[14]
[11]
[03]
[03]
[12]
5.5 mm
(7/32 in.)
13mm
(1/2 in.
)