9
17
4
3
3 in.
(75 mm)
7/32 in.
(5.5 mm)
15
14
16
17
3. Drill pilot holes using a 7/32 in. (5.5 mm) diameter drill bit. Remove wall plate template
14
.
IMPORTANT
: Be sure to drill into the center of the studs.
IMPORTANT
: Pilot holes must be drilled to a depth of 3 in. (75 mm).
4. Install wall plate assembly
15
using four lag bolts
16
and four washers
17
. Tighten the lag bolts only until they are pulled firmly against the
wall plate.
CAUTION:
Improper use could reduce the holding power of the lag bolt.
DO NOT over-tighten the lag bolts
.
