sanus accents ALT1 Instruction Manual Download Page 5

Page: 5 / 32

5/16 x 2 ¾ in.

5/16 in.

10-32 x 1¼ in.

2.5mm

22mm

M8 x 50mm

M6 x 20mm

M6 x 12mm

M8 x 16mm

M8 x 25mm

M4 x 12mm

M6 x 35mm

M8 x 35mm

M4 x 35mm

NOTE:

Not all hardware included will be used.

WARNING:

This product contains small items that could be a choking hazard if swallowed. Before starting, verify all parts are included and undamaged. If

any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts!

Supplied Parts and Hardware

STEP 1 Parts and Hardware

TV Brackets

TV Screws

(qty. 4 each)

[Only one size fits your TV]

Washers

(qty. 4 each)

Spacers

(qty. 4 each)

[If necessary]

M6/M8

M4/M6/M8

CAUTION:

Avoid potential

personal injury or property damage!

The TV brackets

contain potential

pinch points during

operation.

Keep fingers away

from pinch points

when retracting the

TV. (arrows)

(qty. 1)

Summary of Contents for ALT1

































Search results

Summary of Contents for ALT1

Reviews:

Related manuals for ALT1

Brands by name

Popular brands

sanus accents ALT1, Instruction Manual

Search results

Summary of Contents for ALT1

Reviews:

Related manuals for ALT1

Brands by name

Popular brands