Spare parts:
IMPORTANT
: use of spare parts other than certified original SANTOS parts
is prohibited
This machine requires no specific maintenance. The bearings are lubricated for life.
If any intervention is necessary to replace parts subject to wear, such as the couplings,
blades, jar seals, electrical or other components, please refer to the parts lists (see the
exploded view at the end of this manual).
For
all spare part orders
(see references in the exploded view at the end of the manual),
state:
the
type
the appliance serial number and
the electrical specifications
given under the appliance.
FAULT FINDING
Identifying the cause of appliance stoppage with precision.
If the problem persists, switch off the power supply to the appliance (unplug the cord from the
mains socket) and call in the maintenance service or contact a SANTOS approved dealer.
The machine will not start:
•
Check : the mains supply, the condition of the power cord
•
To run the motor of the mixer the jar (
6
) with its lid (
7
) closed must be placed on the base
(
4
) and
locked
using the clamping rod (
1
).
•
Check that there is no food that is too hard or big jamming the blades (
10
).
The appliance stops following an overload:
•
If the motor stalls during operation, reduce the load, allow the appliance to cool down
for several tens of minutes.
•
Check that there is no food that is too hard or big jamming the blades (
10
).
The motor runs but the blades do not rotate:
•
Check the condition of the coupling system. If required, change the 2 parts at the
same time.
(see "maintenance” section)
!
4080045-7-8-9 G20E
11/15
