Check: the presence of the feed channel (
3
) and the locking of the cover (
2
) in the
lowered position Fig.13
THE MACHINE STOPS BECAUSE THE MOTOR HAS OVERHEATED:
(the casings around the motor units are hot)
- Remove the plug from the power supply socket and follow the instructions in the section
on “
motor overheat safety feature
".
THE MACHINE STOPS BECAUSE OF A JAM:
See the section on “
jamming
"
THE MACHINE IS NOISY:
- Check the parts are positioned correctly
- Check no part has been damaged by a fall or the suchlike:
if so, replace this part.
408120 en ma 2017.09
11/18
