98162 EN 1.3 - 01 2010
7 / 23
www.santos.fr
Make sure there is sufficient clearance (behind, above, below) for proper installation and
operation of the appliance.
The cut-out in the countertop represents a rectangle measuring
168mm x 198mm
.
Make sure there is a minimum clearance of 135mm beneath the countertop
The free space above must measure at least 495mm
The minimum clearance to the rear must be 102mm (distance between the cut-out
and the wall)
The minimum clearance sideways must be 30mm
Multiple cut-outs.
It is recommended to leave a distance of 100mm between 2 cut-outs.
Adapting the appliance to use it as a built-in version.
Disconnect the appliance from the mains.
Remove the jar (
1
) and hood lid (
8
)
Tip the appliance backwards
Using a Torx screwdriver, remove the 3 screws located between the metal casing
and motor surround (
6
).
Remove the motor surround (
6
)
408062 en ma 2010.01
7/23
