NOTE: The machine was studied to work correctly with the product T-
FOAM. We cannot grant the correct working of the machine with different
products. Therefore, we strictly recommend to use the product T-FOAM.
7. Re-connect the recovery tank to the solution tank, through the lateral hooks.
8. Connect the plug of the machine to a proper electrical socket, provided of
grounding. Read carefully the indications in the safety regulation paragraph.
9. Connect the hose coming from the external compressor to the quick
disconnect coupling on the regulation panel. In this way the machine can take
the compressed air necessary for the production of foam directly form the
external compressor.
NOTE: Please check that the compressor connected to the machine is able
to provide the quantity of foam needed by the machine without any
problem.
10. Switch on the external compressor and wait for it to work at full capacity.
While waiting, the needle of the manometer which shows the pressure is
moving towards higher pressure values.
11. Regulate the pressure by using the knob located in the machine regulation
panel until the pressure shown by the manometer is around 3,5 bars.
12. Switch on the solution pump, putting the switch in the position “I”. The pump
switch is situated on the pump and motor control panel.
At this point the machine is ready to produce the detergent foam.
13. Switch on the vacuum motor to vacuum foam with the hand tool.
