Santint
PA Series Paint Mixing Machine V1.1
12
6.2
Operation
1) Connect the power supply, switch on the
miniature breaker.
2) Rotate Timer Knob to set Mixing Time. The
longest time is 15 minutes. No sooner the
enacted time exhausts, the machine will stop
work automatically. If you want to stop the
machine during its working, you can rotate
Timer Knob at anti-
clockwise sense to “OFF”.
Notice: if there is any abnormal noise during the
pilot run, stop the machine and check it.
3
）
Press emergency stop button in case of any emergency to stop the machine. Reset the
emergency stop button and the circuit breaker to restart the machine. Rotate the timer knob to
set the mixing time.
7.Troubleshooting
Symptoms
Diagnosis
Troubleshooting
Motor does not
work or is
overloaded.
No power supply
Check the socket, the power cord, small circuit
breaker or the fuse to ensure Switch Box in charge.
Switch Box in trouble
Replace Switch Box
Voltage too low
Make sure if the voltage is located within the local
voltage range ±5%; If not, equip with stabilizing
transformer.
Capacity is broken.
Replace it
Motor in trouble
Replace it
Motor is
working, but
reductor is not
working.
Reductor is broken.
Replace it
One mixing
heads
does not mix
Slotted Setscrew in
plastic Cone-gear
Assembly is damaged
Replace it
（
See “Repair”
）
Whole layer
doesn’t work.
Link Rod Assembly or
the main drive is
broken
Replace it
Partial of the
whole layer
doesn’t work.
Sleeve tube or spring
pin is broken.
Replace the sleeve tube or the spring pin.
Circuit Breaker
Timer
Knob
Emergency
Stop Button
