Santerno ASAB, Instructions Manual

Page: 9 / 12

USB Module
3/6
4. Connection
ASAC ASAB
0
8
5
8
5
.B
1
2
3
11
6
0
9
.B
1
2
3
ASAC ASAB (Remote mode)
A1, 02: Stop input 56, 57: Stop input
58, 57: Reset input
USB Module USB Module
USB port USB port
ASAC: For the USB Module to accept serial commands, a link must be fitted across terminals A1-02 on the soft starter.
ASAB: Input links are required across the stop and reset inputs if the soft starter is being operated in Remote mode. In Local mode,
links are not required.
NOTE
ASAB: Parameter Comms in Remote selects whether the soft starter will accept Start and Stop commands from the
Serial Network Master while in Remote Mode. Refer to the soft starter user manual for parameter details.
5. Configuration
To bring the USB Module on-line:
1.
Remove control power and mains supply from the soft starter.
2. Attach the module to the soft starter as illustrated.
3. Connect the module to the PC via a USB cable. The PC should detect the module and the Hardware Update Wizard will open.
4. Install the USB driver to operate the module as follows.
The driver can be downloaded from santerno.com.
0
8
5
8
8
.A
Welcome to the Found New
Hardware Wizard
Windows will search for current and updated software by
looking on your computer, on the hardware installation CD, or on
the Windows Update Web site (with your permission).
Read our privacy policy
Can Windows connect to Windows Update to search for
software?
Yes, this time only
Yes, now and every time I connect a device
No, not this time
Click Next to continue.
This wizard helps you install software for:
FT232R USB UART
If your hardware came with an installation CD
or floppy disk, insert it now.
What do you want the wizard to do?
Install the software automatically (Recommended)
Install from a list or specific location (Advanced)
Click Next to continue.