Bedienungsanleitung / User manual
VTC-HDH444IRPWDU
_________________________________________________________________________________
- 37 -
5. Camera adjustment via OSD menu
All camera adjustments are done via an OSD menu. On the camera there is a mini-joystick.
Press onto the joystick and a menu pops up in the video picture. You can now move the
joystick left/right/up/down in order to get to the desired menu item. For confirming your
choice, press onto the joystick
In case the menu says “SET key”, this means pressing the joystick.
If you press the joystick, the main menu overview pops up.
Twisted pair (UTP) connector:
The camera is equipped with a RJ-45 system connector. Hence the following is possible:
remote power supply, UTP (twisted pair) of the video signal and OSD parameterising via
RS-485. The RS-485 communication is done via the Pelco D protocol. The command to
open/close and to confirm the camera OSD is “Open iris”. Use the keyboard joystick and
move it up/down/left/right to navigate through the OSD menu.
