Bedienungsanleitung / User manual VTC-HDH422PWD /
VTC-HDH432IRPWD / VTC-HDH444PWDU
_________________________________________________________________________________
- 42 -
L/L Sync (LineLock Synchronsation):
INT: internal
synchronisation
LL: LineLock
synchronisation
Note: If you use 12 V DC, synchronisation iss et to „internal“. If you use 24 V AC, you
can also use LineLock synchronsation.
Monitor type:
Change the settings according to your monitor. LCD/CRT monitors can be used.
Factory Reset:
Return to factory settings.
Communication:
Protocols: Pelco-D is supported by default.
Camera ID: Camera ID can be set to 0-255.
Baud rate:
Baud rate can be set to 4800-57600.
Save/reboot: Save the set values and reboot the camera.
Previous:
Return to main menu.
Exit:
Save the current settings and return to main menu.
Note: RS-485
(only for VTC-HDH444PWDU):
The camera can also be parameterised remotely by using the RJ-45 system
connector via a RS-485 connection. The communication is done via the Pelco D
protocol. The command to open/close and to confirm the camera OSD is “PRESET
95”. Using the up/down/left/right commands of the keyboard joystick, you can
navigate through the OSD menu.
