Bedienungsanleitung / User manual VTC-262PWD / VTC-274PWDU
_________________________________________________________________________________
- 42 -
5.9 Special
Language:
Select the OSD menu language.
The default language is German.
Title:
Define whehter the camera title/name should be displayed in the picture or not.
Communikation
(only for camera VTC-274PWDU):
Used to configure the RS-485 port.
o
ID:
Set the ID for the RS-485 port (0 – 255).
If several cameras are connected in the same RS-485 branche, every camera
has to have its own camera ID.
o
Baud Rate (default: 9600):
Define the Baud rate for the RS-485 port (2400 – 9600).
o
Protocol:
By default, Pelco D is supported.
DPC (Dead Pixel Compensation):
If enabled, the camera runs a dead pixel compensation procedure.
Factory
set:
If enabled, all adjustments are reset to factory default settings.
5.10 Exit
Save & Exit:
Exit the OSD menu while the settings are saved.
Exit:
Exit the OSD menu without saving the settings.
