User manual
VDC-295IDH
_________________________________________________________________________________
- 45 -
System menu
Calibration:
On (auto origin check) / Off
Password enable:
On (password required to enter the menu) / Off
Menu time out:
On (5 minutes) / Off (menu is always displayed)
Blink cursor:
On / Off (no blinking cursor)
Dome answer:
On / Off (no recognized command for the dome)
This option may be helpful to avoid a collision of commands
used by some DVRs.
Motor setup:
The motor setup menu is used to set the pan/tilt speed of the camera. By twisting the
joystick left/right the desired speed can be selected. During operation, press
„153“ +
„ON“ to slow down the speed. Press „153“ +“ OFF“ to return to normal speed.
If you press and hold „CTRL“ and move the joystick, the camera will operate in turbo
speed mode.
Proportional P/T:
On / Off
P/T Mode:
Slow, normal, turbo
Slow pan maximum:
19°-90°/sec.
Slow tilt maximum:
19°-90°/sec.
Normal pan maximum:
40°-360°/sec.
Normal tilt maximum:
40°-200°/sec.
Turbo pan maximum:
200°-380°/sec.
Turbo tilt maximum:
90°-300°/sec.
