User manual
VDC-295IDH
_________________________________________________________________________________
- 12 -
The dome camera must be installed by qualified service personnel in accordance with all
local and federal electrical and building codes. The system should be installed according to
figures 4 through 9.
Fig. 5: Layout of switches
2.3 Setting the dome camera termination
The device which is connected at end of line, whether it is a dome camera or a keyboard,
must be connected by a terminated cable. The termination of the cable is achieved by the
appropriate DIP switch setting. Without proper termination, control signal errors may occur.
The total length of the communication cable should not exceed 1.2 km.
Fig. 6: Setting the dome camera termination
SW1
1
2
Terminated
ON
ON
Not terminated
OFF
OFF
