User Manual
SVS-3001
_________________________________________________________________________________
- 8 -
QUICK INSTALLATION GUIDE
To operate the video server, please follow these steps:
1. Connect the hardware components as follows:
2. Insert the CD (included in the delivery) into your PC/laptop and install the IP-finder.
3. The IP-finder displays an IP address for the video server. Double-click on the IP
address and the Internet Explorer comes up automatically. In case this doesn’t work,
you may also enter the IP address (as shown by the IP-finder) manually into the
Internet Explorer. Using the IP-finder, another IP address can be assigned to the
video server, if required.
Note:
The video server comes with a default IP address:
Default IP address: 192.168.1.168 (or DHCP, if available)
User name:
admin
Password:
9999
Please refer to the following chapters in this user manual for further information on video
server configurations.
1. Prepare a PC/laptop with
an Ethernet link to the
network.
2. Connect the SVS-3001
video server to a network
hub/switch with a standard
pass through (CAT5) cable.
You may also connect
SVS-3001 directly to the
PC/laptop using a cross
over cable.
3. Connect the video output of
the camera using standard
75 Ohm coaxial cable
terminated with BNC
connector.
4. Connect to power
(12V DC).
5. Ensure the power adapter
specifications match the
power system (110 V or
220 V). Connect the
adapter to the outlet.
6. Check both LEDs (power
and network); both lights
should be on.
