Bedienungsanleitung / User manual SVE-ST100SA
_________________________________________________________________________________
- 22 -
2. DESCRIPTION OF PARTS
Front panel:
6. Video input BNC connector
As a video input connector, connect to the camera.
7. Video loop out BNC connector
As an output connector, connect to a device such as a VCR or monitor.
8. Reset
Reboot the device system or set the device to its factory default settings. Refer to
chapter “4.3 Reset” for more specific information.
9. LAN connector
Use the RJ45 LAN connector for 10/100 Base-T Ethernet.
10. Power connector
Connect the power adaptor for power supply. DC 12 V 1A adaptor is needed.
3. CONNECTIONS
Connect the camera to the
video input connector
on the back panel using 75 Ohm video
coaxial cables with a BNC connector. The video channel input can be looped to other
equipments as CRT monitor through external video output connector.
①
②
③
④
⑤
