0 3
T r i m
Trim Installation
TRIM PLATE & PLATE COVER
Fit sleeve over valve until it bottoms out.
Place foam strip around the inner edge of the shower plate.
Press the shower plate against the wall.
Screw the 2 plate screws through the plate holes and onto the
valve’s screw holes. Tighten both screws firmly.
Fit the plate cover over the sleeve and press it all the way into
the trim plate.
-
-
-
-
-
HANDLE
Insert the handle onto the valve stem. Turn the handle
clockwise until it reaches the end. Reposition the handle to
the desired position. The handle should be facing up at 12
o’clock position.
Using the provided Allen key, insert the set screw onto the
handle and press against the valve’s stem. Tightem it firmly.
Adjust the height of the handle if it is scraping against the
shower plate.
Insert the plug into the handle set screw hole.
-
-
-
-
Trim plate
Sleeve
Finished wall
Plate screws
Plate cover
Trim plate
Handle
Set screw
Allen key
Plug
C OLD
WARM
WARMER
HOT
