background image

21

Warranty

Santak Corp. offers the buyer and the client (hereinafter referred to as 'the
Buyer') the following limited warranty for repair:

Starting from the initial date when the Buyer purchases the product from
Santak or the distributor/the retailer of Santak, the Uninterruptible Power
System and its components related to this 'User's Manual' will not be
short of materials and services under normal use, service and mainte-
nance within three years.  The foregoing warranty card is the only accept-
able warranty card unless  other reasonable  commercial agreements
with specified purposes have been reached.  In certain places where
local laws have special provisions for the term of warranty, the foregoing
term shall not be applicable.  This warranty offers special legal rights.
You are able to obtain other different rights pursuant to local laws. The
Buyer is responsible for certain service and maintenance expenses. The
following situation is not covered by the warranty:  finished goods lost or
serial number  manipulated, loss  or damage due  to force  majeure or
external reasons, misuse, accident, negligence, unauthorized alteration
or repair, overuse, violation of operation stipulations.

Warning: The warranty does not cover any loss caused by the over dis-
charge of the battery.  In order to prevent over discharge, when utility
power supply is cut off, do not keep the UPS working in battery mode for
more than two days without recharging of the battery.  Moreover, the bat-
tery should be charged again at the interval of 4 to 6 months.

Appendix 3. Warranty

Within the warranty period of three years, in case if any damage of the
machine is covered by the warranty, Santak shall offer repair or replace-
ment according  to its own  means.  In case  of need for  the warranty
service, please contact your local Santak Service Center.  The transpor-
tation charges shall be borne by the buyer.

Summary of Contents for Castle C10K(E)


























Reviews: