ENGLISH
3
SAFETY INSTRUCTIONS
WARNING
Special tools and knowledge are necessary for the service of your bicycle. For your safety, only an authorized
dealer should install, adjust, or service the frame or the components. Special tools and parts may be required to
complete this service. Make sure to set up a maintenance schedule with your dealer to keep your bicycle safe
and performing its best. Consult your dealer if you have any questions or concerns about proper setup and
riding your bike. Stop riding immediately and consult your dealer if you suspect any problems with your bicycle.
For current service instructions, part numbers, and technical information, visit
Please contact your local Santa Cruz Bicycles® distributor or dealer for questions and orders. Information
contained in this publication is subject to change at any time without prior notice. The appearance of your
product appearance may differ from the images contained in this publication.
Adhere to all torque and sizing specifications for press fits and thread fits. Over-tightening can damage
threads or cause parts to fail. Using the wrong size part can cause parts to fail and may cause a crash,
which can result in serious injury and/or death.
You must register your bicycle in order to make a warranty claim (see the instructions on the Warranty page).
Always wear safety glasses and personal protective equipment, such as latex or nitrile gloves when
servicing Santa Cruz Bicycles products.
CABLE ROUTING
INTRODUCTION
We recommend checking your cables, housing, and hydraulic lines for signs of wear before each
ride. Replace these wear items after every 100-150 hours of riding, depending on your riding style
and riding conditions. This service applies to MY18 Nomad (carbon only).
TOOLS AND SUPPLIES
• Safety glasses
• Latex or nitrile gloves
• Pick
• Hex wrenches
• Zip ties
• Pliers
• Cable cutters
• Brake line
• Cable housing
• Silicon bike spray
